×

Menu

Index

Search

(c) Profile Systems Design Group, Inc. 2024 Build: 4.008.727 Help ID: 1150

HP (Symbol ST2208) Barcode Scanner Configuration Notes

The default configuration of the HP Barcode Scanner can be modified to include a return after a barcode is scanned.

Note: With these files, printing may make the barcodes unreadable by the scanner. If this happens, make sure your print settings aren't scaling the page (Scale 100%, no scaling, etc) and the Print Mode is not Optimized printing (Raster printing, etc).

Print the following document which has been extracted from the HP Programming Reference Guide to help configure the scanner to include a carriage return after each scan.

1. Print HPBarCodeScanner-EY022AT-Data-Suffix document to a laser printer without image compression.

2. Scan the barcode above "Scan Options"

3. Scan the barcode above "<DATA><SUFFIX>"

4. Scan the barcode above "Enter"

5. Test barcode scanner with an product barcode to confirm configuration.

Print the following document which will set the scanner to recognize UPC-A and UPC-E bar codes

1. Print HPBarCodeScanner-EY022AT-UPC-A-UPC-E document to a laser printer without image compression.

2. Scan the Enable bar code for both UPC-A and UPC-E

3. Test barcode scanner with an product barcode to confirm configuration.

Print the following document will configure the scanner to convert UPC-E bar codes to UPC-A bar codes.

1. Print HPBarCodeScanner-EY022AT-UPC-E-to-UPC-A document to a laser printer without image compression.

2. Scan the Enable barcode

3. Test barcode scanner with an product barcode to confirm configuration.

Print the following document which has been extracted from the HP Programming Reference Guide to help configure the scanner recognize the Interleaved 2 of 5 barcode

1. Print HPBarCodeScanner-EY022AT-Interleaved-2of5 document to a laser printer without image compression.

2. Scan the Enable barcode

3. Test barcode scanner with an product barcode to confirm configuration.

Print the following document which has been extracted from the HP Programming Reference Guide to help configure the scanner recognize the Code39 barcode

1. Print HPBarCodeScanner-EY022AT-Code39 document to a laser printer without image compression.

2. Scan the Enable barcode

3. Test barcode scanner with an product barcode to confirm configuration.

Print the following document which has been extracted from the HP Programming Reference Guide to help configure the scanner recognize the Preamble (Prefix) character within the UPC-E bar code.

1. Print HPBarCodeScanner-EY022AT-Preamble(Prefix) document to a laser printer without image compression.

2. Scan the Enable barcode

3. Test barcode scanner with an product barcode to confirm configuration.

Print the following document which has been extracted from the HP Programming Reference Guide to help configure the scanner recognize the Check Digit character (far right character) within the UPC-E bar code.

1. Print HPBarCodeScanner-EY022AT-Transmit-CheckDigit document to a laser printer without image compression.

2. Scan the Enable barcode

3. Test barcode scanner with an product barcode to confirm configuration.