(c) Profile Systems Design Group, Inc. 2024 Build: 4.008.719 Help ID: 5699
Work Area
Changing the Work Group Value
Make sure to change the Work Area value when the shift on the workstation is Closed. The Work Area value is stored within the Shift information and by design does not refresh if the Value in the Work Area is changed. If you desire to change the Work Area relationship to General Ledger, first close the shift, make the Work Area change, Exit TransActPOS and then return to the application to Begin Shift.
Setup the Work Area
If the following message appears go to "Work Areas Setup" located in System Company Setup > GL Accounts Page1 has not been setup.
Once the Work Areas have been assigned to the system, the menu prompt changes to reflect the number of Work Areas established within the system.
In this example, three Work Areas are assigned to the system.
Returning to the System > Workstation > Workstation Settings screen, the system displays the available Work Areas that may be assigned to the work station. In the example below, A, F and b are valid Work Area values.
If an incorrect Work Area value is entered, the system will present the error of invalid Work Area.